PhonerLite configuration for My SIP Switch
I discovered today (Thanks to our user : deeknow) this nice, very easy to use and free softphone : PhonerLite.
Official site and download
The offical English web page is :
http://www.phonerlite.de/index_en.htm
PhonerLite is the lighter version of Phoner. It shares most of the code but with a (much) lighter interface in order to save resources. It was using 8Mo of RAM on my Windows XP while idle which is much lower than the idle XLite which was using up to 32Mo.
The donwload page is :
http://www.phonerlite.de/download_en.htm
If you download the ZIP file, you don’t need to do any installation (just don’t mess with the DLL); you can start using the phone by double clicking on PhonerLite.exe .
Screenshot and a quick review
It does all the necessary thing : easy control of settings and options (sound settings, codecs, security, network settings) … Regarding the phone features : call on hold (that’s the little hand near the green ‘pick up’ button), redial (the yin-yang like image below the hang up button), do not disturb, conference calls , call forwarding (I didn’t test these 2 features so far), logs, phone book …
Another thing I like about it is that it provides live statistics about the line such as Jitter and packet loss for instance. If you are having call quality issues, you can easily check if it is due to your network or broadband connection.
I have not tested it for long enough to judge it properly but the voice quality seemed nice; as nice as you can expect it to be on a softphone.
My SIP Switch Configuration
Now here are the steps to configure it with My SIP Switch:
Note that if you are behind a firewall, you may want to enter a STUN server (for instance : stun.xten.com).
Enter your My SIP Switch username and password. The authentication name is not necessary.
Select your audio devices.
Confirm and start My SIP Switching 
Tags: configuration, phonerlite, softphone, Windows